Filter
Top Products
Specifying a
Trigger
Condition
To capture the data and place the data of interest in the center of the
displayofthestatelistingmenu,youneedtotellthestateanalyzerwhen
to trigger. Since the first event of interest is address 0000, you need to tell
the state analyzer to trigger when it detects address 0000 on the address
bus.
1. Display the State Trace Specification menu.
a. Touch the field second from the left at the top of the screen.
b. Touch the field labeled Trace 1.
2. Set the state analyzer so that it triggers on address 0000.
a. Touch the 1 in the Sequence Levels field of the menu.
Figure 8-13. State Trace Specification Menu
HP 16510B Using the State Analyzer
Front-Panel Reference 8 - 13