Filter
Top Products
In Glitch mode the maximum delay is 25 seconds, which is controlled by
memoryandsampleperiod(512X50ms). Thesamplerateisalso
dependent on the delay setting. It is represented by the following formula:
if delay < 20 ns
Hwdelay = 20 ns (this is an instrument constant)
if delay > 10 ms
Hwdelay = 10 ms
else Hwdelay = delay (delay setting in waveforms menu)
Sample period = larger of:
s/Div ÷ 25 or
absolute value [(delay - Hwdelay) ÷ 256]
If sample period > 50 ms
Then sample period = 50 ms
The State
Listing Menu
The State Listing menu is the display menu of the state analyzer. It is
accessed when the state analyzer is on. It will automatically be displayed
when you press RUN.
There are two different areas of the state listing display, the menu area and
the listing area. The menu area is in the top one-fourth of the screen and
the listing area is the bottom three-fourths of the screen.
Interpreting the Display HP 16510B
6 - 10 Front-Panel Reference