Filter
Top Products
Timing Trace
Specification
Menu Fields
The fields in the Timing Trace Specification menu are:
1) Run/Trace Mode
2) Armed by
3) Acquisition mode
4) Label
5) Base
6) Find Pattern
7) Pattern Duration (present for ______)
8) Then find Edge
These are described in the following sections.
1 Run/Trace
Mode
You specify the mode in which the timing analyzer will trace data when
you touch Run. You have two choices for trace mode: Single and
Repetitive. When you touch Run and hold your finger on the field, you
will see the following pop-up menu:
You select the trace mode by touching the Run field, and, without lifting
your finger from the screen, move it to the desired trace mode. When you
lift your finger, the logic analyzer traces data in the mode you specify. If
you wish to abort the trace after you touch Run but before the trace starts,
move your finger to Cancel before lifting your finger.
Figure 5-30. Run Field Pop-up Menu
Menus HP 16510B
5-28 Front-Panel Reference