Filter
Top Products
How to Switch
Between
Analyzers
You can switch between analyzers in any main menu by touching the field
(second from the left in the upper left-hand corner). When the pop-up
appearsyoucanselectthedesiredmenuinthedesiredanalyzerwhenboth
analyzers are on. One example of the options available when both
analyzers (one state and one timing) are on are:
• Format 1
• Format 2
• Trace 1
• Trace 2
• Waveform (for Timing analyzer)
• Listing (for State analyzer)
Touch the field in the pop-up to enter the desired menu. You will
immediatelygotothatmenu.
Returning to
the System
Configuration
Menu
You can return to the System Configuration menu from any main logic
analyzer menu. To return to the System Configuration menu. touch
State/Timing E. When the pop-up appears, touch System. When the
pop-up closes, System will be displayed in the upper left corner. If
Configuration is not displayed in the field second from the left in the
upper left corner, touch this field. When the pop-up appears, touch
Configuration. You will now be in the System Configuration menu.
Pop-up Menus The pop-up menu is used exclusively in this logic analyzer. This gives you
more flexibility to move through the menu tree and faster access to the
individual subsystems.
To use the pop-ups when they appear, simply touch the field in the pop-up
you want. The pop-up will immediately close and the menu you select will
appear.
HP 16510B Using the Front-Panel Interface
Front-Panel Reference 3-3