Filter
Top Products
With these glitch detection fields you specify on which channel or
channels you want the analyzer to look for a glitch. These fields are
discussedinmoredetailinthe"ThenFindEdge"sectionlaterinthis
chapter.
Glitch Acquisition mode causes the storage memory to be cut in half, from
1k to 512. Half of the memory (512) is allocated for storing the data
sample, and the other half for storing the second transition of a glitch in a
sample. Every sample is stored. The sample rate varies from 20 Hz to 50
MHz (50 ms/sample to 20 ns/sample) and is automatically selected by the
timing analyzer to insure complete data in the window of interest.
When your timing analyzer triggers on a glitch and displays the data, the
glitch appears in the waveform display as shown below.
4Label The Label fields contain the labels that you define in the Timing
Format Specification menu. If there are more labels than can fit on screen,
use the KNOB to view those that aren’t displayed.
Figure 5-34. Glitch in Timing Waveform
Menus HP 16510B
5-32 Front-Panel Reference