Filter
Top Products
Symbols Pattern Symbols: User can define a mnemonic for the specific bit pattern
of a label. When data display is SYMBOL, mnemonic is displayed where
the bit pattern occurs. Bit pattern can include 0s, 1s, and don’t cares.
Range Symbols: User can define a mnemonic covering a range of values.
Bit pattern for lower and upper limits must be defined as a pattern of 0s
and 1s. When data display is SYMBOL, values within the specified range
are displayed as mnemonic ± offset from base of range.
Number of Pattern and Range Symbols: 100 per analyzer. Symbols can
be down-loaded over RS-232C.
Timing Analysis
Transitional
Timing Mode
Sample is stored in acquisition memory only when the data changes. A
time tag stored with each sample allows reconstruction of waveform
display. Time covered by a full memory acquisition varies with the
number of pattern changes in the data.
Sample Period: 10 ns.
Maximum Time Covered By Data: 5000 seconds.
Minimum Time Covered By Data: 10.24 µs.
Glitch Capture
Mode
Data sample and glitch information stored every sample period.
Sample Period: 20 ns to 50 ms in a 1-2-5 sequence dependent on
s/div and delay settings.
Memory Depth: 512 samples/channel.
Time Covered by Data: Sample period × 512.
HP 16510B Specifications and Operating Characteristics
Front-Panel Reference C-5