Filter
Top Products
To display a two state mixed mode listing you must start with a single
state listing. In this example, Listing 1 is the starting point. The desired
display is:
• addresses of machine 1
• inverse assembled data of machine 1
• data on the data bus of machine 2
• status of machine 2
Start with the Listing 1 display by touching the STAT field. The following
pop-up appears:
With this pop-up you can select a label from either machine to be
displayed where the label "STAT" is now displayed. In this example, you
want the data from machine 2. Touch the "Machine - State/TimingE- Z80"
field.
When the pop-up appears, choose the machine that will supply data for the
display. Since you want to see the data from the data bus of the other state
analyzer (State/Timing E-RS232 PORT), touch this field in the pop-up.
Figure 6-17. Machine and Label Pop-up Menu
Interpreting the Display HP 16510B
6 - 18 Front-Panel Reference