8. Frequency Response Test
49. For each input, subtract the lowest minimum level (greatest
negative) from the highest maximum (least negative)
measurement recorded in steps indicated. The result should not
exceed 2
dB.
SIGNAL INPUT 1
100 Hz to 500 MHz (from steps 16, 25, 42, or 48)
Spec:
~2
dB
Overall Maximum dBm
-Overall Minimum dBm
Overall Deviation dBm
SIGNAL INPUT 2
100 kHz to 1.5
GHz
(from steps 12 or 31)
Spec:
~2
dB
Overall Maximum
dBm
-Overall Minimum dBm
Overall Deviation
dBm
50. Subtract the lowest minimum level (greatest negative) from the
highest maximum (least negative) measurement recorded in steps
indicated. The result should not exceed 3
dB.
SIGNAL INPUT 1
100 Hz to 1.5
GHz
(from steps 15, 16, 25, 42, or 48)
Spec:
~3
dB
Overall Maximum
dBm
-Overall Minimum
dBm
Overall Deviation
dBm
2.30
Performance Tests