Filter
Top Products
APPENDIX
Appendix 3 Error Code
289
A
4053H Protect error • An error occurred when writing data to the specified drive
(memory).
• Check the specified drive (memory). Or, write data again
after changing the corresponding drive (memory).
4060H Online
registration error
• The online debug function is being executed with another
engineering tool.
• Finish the operation of the other engineering tool and then
execute the function again.
• If the operation of the other engineering tool is on hold,
resume and finish the operation of the other engineering
tool, and then execute the function again.
4080H Other errors • Request data error. • Check the request data that has been specified.
4081H Other errors • The search target data cannot be detected. • Check the data to be searched.
408BH Other errors • The remote request cannot be executed. • Reexecute after the CPU module is in a status where the
remote request can be executed.
• For remote operation, set the parameter to "Enable remote
reset".
4121H File related error • The specified drive (memory) or file does not exist. • Execute again after checking the specified drive (memory)
or file.
4122H File related error • The specified drive (memory) or file does not exist. • Execute again after checking the specified drive (memory)
or file.
4127H File related error • File password 32 mismatch. • Execute again after checking the file password 32.
4135H File related error • The date/time data of the engineering tool (personal
computer) is out of range.
• Execute again after checking the clock setting of the
engineering tool (personal computer).
4139H File related error • The size of the specified file has exceeded that of the
existing file.
• Execute again after checking the size of the specified file.
413AH File related error • The specified file has exceeded the already existing file
size.
• Execute again after checking the size of the specified file.
413BH File related error • The same file was simultaneously accessed from different
engineering tools.
• Execute again after a while.
413EH File related error • Operation is disabled for the specified drive (memory). • Execute again after changing the target drive (memory).
4171H CPU module
built-in Ethernet
port error
• The port for communication use is in remote password
locked status.
• Execute communication after unlocking the remote
password processing.
4181H CPU module
built-in Ethernet
port error
• Transmission to the receiving modules is unsuccessful. • Check the external device operation.
• Check the status of the lines, such as cables, hubs and
routes, connected to receiving modules.
• Some line packets may be engaged. Retry to communicate
a little while later.
• The receiving module may have no free space in receive
area (TCP window size is small). Check whether the
receiving module processes receive data, or whether the
CPU module does not send unnecessary data.
• Check whether the settings of the subnet mask pattern and
the default router IP address of the CPU module and the
receiving modules are correct, or whether the class of the IP
address is correct.
4183H CPU module
built-in Ethernet
port error
• Communication with receiving modules was interrupted. • Check the external device operation.
• Check the status of the lines such as cables, hubs and
routes connected to receiving modules.
• Error may be generated when connection is forcibly
canceled during communication. In that case, there is no
issue, so clear the error.
419EH CPU module
built-in Ethernet
port error
• Connection to the module was unsuccessful or interrupted. • Check the external device operation.
• Check the status of the lines such as cables, hubs and
routes connected to receiving modules.
• Retry to connect a little while later, if the error occurred in
communication.
41C5H File related error • The specified file does not exist. • Execute again after checking the file.
41C8H File related error • The size of the specified file has exceeded that of the
existing file.
• Execute again after checking the size of the specified file.
• If the error recurs after re-execution, the file information data
may be corrupted.
• Back up data in the CPU module, and then initialize the
memory.
Error
code
Error name Error details and cause Action