11 REMOTE OPERATION
11.1 Remote RUN/STOP
87
11
• When set to STOP at contact ON
When contact is set to OFF, the CPU module is in the RUN status.
When contact is set to ON, the CPU module is in the STOP status.
Engineering tool method
Refer to the following.
GX Works3 Operating Manual
Method using external devices that use SLMP
Execute by SLMP command. For details on commands, refer to the following manual.
MELSEC iQ-F FX5 User's Manual (SLMP)
Step 0 ENDStep 0 END
ON
OFF
STOP
RUN
STOP status
RUN contact
RUN/STOP status
RUN
OFF
Step 0 ENDStep 0 END
ON
ON
OFF
STOP
STOP status
Remote RUN command
Remote STOP command
RUN/STOP status
External Device