Filter
Top Products
Configuring an M2UA System on a Signaling Gateway 149
Smart Media Software Configuration Guide 5 • Configuring SIGTRAN Applications
3. Verify that the "Mtp2Cfg was successfully updated" message appears, and that the Enabled box is
checked.
Figure 230. Successful Configuration Message
Understanding Parameters for MTP2 Configurations
Creating MTP2 Links
Now that you have created an MTP2 configuration, you must
create the necessary MTP2 links. An MTP2 link
is used to connect the MTP2 physical layer to a line service carrying SS7 signaling.
To create an MTP2 link:
1. Cl
ick Create New Mtp2 Link in the MTP2 configuration window:
Figure 231. MTP2 Link in MTP2 Configuration Window
2. Configure the new MTP2 link:
–Enter a na
me for the new link
– Select a conn
ection mode
– Select a lin
e service
–Assign ti
meslots to the link
– Select a prot
ocol type
– Select a DPC l
ength
– Select a tim
eslot rate
Table 48. Configuration Parameters for New MTP2 Configurations
Parameter Description
Name Used by the Web Portal to indicate a specific object or string in the system