Filter
Top Products
Configuring an M3UA System on an Application Server 186
Smart Media Software Configuration Guide 5 • Configuring SIGTRAN Applications
Creating an M3UA Configuration (ASP)
To set up your M3UA system on an application server process (ASP), you must first create a new M3UA con-
figuration. In this configuration the SS7 MTP2 layer is re
placed entirely by the SIGTRAN M3UA layer, and
the MTP3 layer is extended over the IP network. To create an M3UA configuration on an ASP:
1. Se
lect M3UA from the navigation panel:
Figure 309. SS7 > M3UA
2. Configure the M3UA service for SGP:
–Enter a na
me for the configuration
– Select App
lication Server Process (ASP) as the node type
–Click Cre
ate
Figure 310. Creating the New M3UA (ASP) Configuration
3. Verify that the "M3uaCfg was successfully updated" message displays.
Figure 311. Successful Configuration Message
Understanding Parameters for M3UA Configurations
Table 72. Configuration Parameters for New M3UA Configurations
Parameter Description
Name Used by the Web Portal to indicate a specific object or string in the system
Node Type Assigns a configuration to an M3UA network. Possible values:
Signaling Gateway Process (SGP)
Application Server Process (ASP)
IP Server Process (IPSP)