Filter
Top Products
Selecting Timeslots for TDM Interfaces 219
Smart Media Software Configuration Guide 7 • Configuring H.248
Selecting Timeslots for TDM Interfaces
Finally, you must assign timeslots to the TDM interfaces that have been associated with the H.248 configura-
tion:
1. Cl
ick Edit next to the line service you wish to configure, in the H.248 configuration window.
Note
A timeslot mask can be applied to all line services at once by selecting
Timeslot mask for all line services instead.
Figure 386. MG H.248 TDM Terminations Window
2. Select timeslots:
– Add the desired timeslots by c
hecking individual boxes, or simply select all times by clicking Select all
–Click Sa
ve
Figure 387. Enabling Timeslots
3. Verify that the "h248_fix_term_cfg was successfully updated" message displays.
Figure 388. Successful Update Message