Filter
Top Products
Configuring an IUA System on a Signaling Gateway 164
Smart Media Software Configuration Guide 5 • Configuring SIGTRAN Applications
Understanding Parameters for IUA Links
Creating IUA Peers
After you have created the IUA links, you must define IUA peers for your system.To create an IUA peer:
1. Cl
ick Create New Iua Peer in the IUA cluster configuration window:
Figure 266. IUA Peers
2. Configure the new IUA peer:
–Enter a na
me for the peer
–Enter a de
stination port (as configured in the destination element)
–Click Cre
ate
Figure 267. Creating the New IUA Peer
3. Verify that the "Iua Peer was successfully created" message displays.
Figure 268. Successful IUA Peer Message
4. Enter a destination address for the peer:
–Enter a de
stination address
–Click the "<<" b
utton to add it to the list of destination addresses
Table 59. Configuration Parameters for New IUA Links
Parameter Description
Name Used by the Web Portal to indicate a specific object or string in the system
Interface ID Identifies the interface of an IUA link
Variant Indicates the protocol variant to be used on a signaling stack.
Possible values:
4ESS
NI2
AUS
HONG-KONG
5ESS
JAPAN INS
DMS
Side Defines each side of an ISDN stack. Possible values:
Network/User