Filter
Top Products
Configuring an M3UA System on an Application Server 187
Smart Media Software Configuration Guide 5 • Configuring SIGTRAN Applications
Creating an M3UA Peer Signaling Process (ASP)
After you have created M3UA user part, you must create a new
M3UA peer signaling process (PSP). A PSP is
used to describe a remote SGP that is accessible through the M3UA system. To create an M3UA Peer Signal-
ing Process (PSP) on an ASP system:
1. Cl
ick Create New M3ua Peer Signaling Process in the M3UA network configuration window:
Figure 312. M3UA Network Configuration Window: Create M3UA PSP
2. Configure the new M3UA PSP:
–Enter a na
me for the PSP
– Select App
lication Server Process (SGP) as the PSP type
–Enter a de
stination port (as configured in the destination element)
–Click Cre
ate
Figure 313. Creating the New M3UA PSP (ASP)
3. Verify that the "M3ua PSP was successfully created" message displays.
Figure 314. Successful M3UA PSP Message
4. Associate a SAP with the new PSP:
– Select a SAP fr
om the list of available SAPs
–Click the "<<" button
to associate it with the PSP.
Figure 315. Associating SAPs with the M3UA PSP