Filter
Top Products
Configuring ISDN-PRI Signaling 53
Smart Media Software Configuration Guide 3 • Configuring an ISDN-SIP Gateway
Figure 57. Create New ISDN Stack
4. Verify that the "ISDN stack was successfully created" message appears.
Figure 58. Confirmation Message for New ISDN Stack
Understanding Parameters for ISDN Stacks
Table 6. Configuration Parameters for New ISDN Stacks
Parameter Description
Enabled Indicates whether an object is currently implemented or not
Name Used by the Web Portal to indicate a specific object or string in the system
Line Service Indicates which TDM line service is to be associated with the object being created
Variant Indicates the protocol variant to be used on a signaling stack. Possible values:
4ESS/AUS/5ESS/DMS/NI2/HONG-KONG/JAPAN INS
Side Defines each side of an ISDN stack. Possible values:
Network/User