Filter
Top Products
Configuring SIP Signaling 59
Smart Media Software Configuration Guide 3 • Configuring an ISDN-SIP Gateway
Creating a SIP service access point (SAP)
After you have created a SIP stack and transport server, yo
u must create a new service access point (SAP) for
your configuration. The Service Access Point is used to bind the SIP stack with a transport server. Depending
on the system configuration, multiple SAPs can be configured.
To create a new SIP SAP:
1. Cl
ick SIP in the navigation panel:
Figure 72. Menu: SIP
2. Click Edit next to the SIP stack for which you wish to create a SAP:
Figure 73. Edit SIP Configuration List
3. Click Create New SAP under the Service Access Points list:
Figure 74. Service Access Points (SAP) List
4. Create the new service access point:
–Enter a na
me for the SAP
–Click Cre
ate
Figure 75. Creating a New SAP
5. Verify that the "Sip Sap was successfully created" message appears.
Figure 76. Confirmation Message for SIP SAP
6. Associate the previously created SIP transport server with your new configuration: