Filter
Top Products
Configuring the ISUP Layer 99
Smart Media Software Configuration Guide 4 • Configuring SS7 Signaling
–Click Create
Figure 139. Creating the New ISUP User Part
3. Verify that the "IsupUserpart was successfully created" message appears, and that the Enabled box is
checked.
Figure 140. Successful ISUP User Part Message
Understanding Parameters for ISUP User Parts
Table 25. Configuration Parameters for New ISUP User Part
Parameter Description
Name Used by the Web Portal to indicate a specific object or string in the system
Protocol Type Identifies the SS7 protocol variant that will be used with a particular object. The
appropriate protocol variant depends on the user's geographical location. Values
are chosen from a drop-down list. The Protocol Type parameter can take on the
following values, depending on the object being configured:
ITU
ITU88
ITU92
ITU97
TELCORDIA
ANSI88
ANSI92
ANSI95
SINGAPORE
Q767
TTC
NTT
CHINA
ETSI
ETSIV3
UK
Sub Service Field Differentiates between national and international signals in MTP3 networks.
Possible values: International/National/Nat. Reserved/Inter. Reserved
Address Indicator Type Assigns a default address value in ISUP user parts, when unspecified.
Possible values:
Not Present/Subscriber Number/National Number/International Number
Numbering Plan Assigns a default numbering plan in ISUP user parts, when unspecified.
Possible values:
Unknown
Telex
ISDN
National
Telephony
Private
Data
Reserved