Filter
Top Products
Configuring an M3UA System on IP Signaling Points 175
Smart Media Software Configuration Guide 5 • Configuring SIGTRAN Applications
Creating an M3UA Route
After you have configured M3UA user parts, PSPs, and peer servers, you must create an M3UA route for your
sys
tem. To create an M3UA route:
1. Cl
ick Create New M3ua Route in the M3UA network configuration window:
Figure 292. M3UA Network Configuration Window: Create M3UA Route
2. Configure the new M3UA route:
–Enter a na
me for the route
– Select a ro
ute type
– Select an M3
UA peer server (choose Local Peer server, if associated with an OPC, select Remote Peer
server, if using DPC)
– Select an M3
UA user part (select NONE, if associated with a DPC)
– Select a poi
nt code
– Select a poi
nt code mask (Recommended value: Exact-match)
– Select a s
ub-service field type
–Click Cre
ate
Figure 293. Creating the New M3UA Route
3. Verify that the "M3ua route was successfully created" message displays.
Figure 294. Successful M3UA Route Message