Filter
Top Products
Configuring an M3UA System on a Signaling Gateway 183
Smart Media Software Configuration Guide 5 • Configuring SIGTRAN Applications
Creating an M3UA Route (SGP)
After you have configured M3UA user parts, PSPs, and peer servers, you must create an M3UA route for your
sys
tem. To create an M3UA route on an SGP:
1. Cl
ick Create New M3ua Route in the M3UA network configuration window:
Figure 306. M3UA Network Configuration Window: Create M3UA Route
2. Configure the new M3UA route:
–Enter a na
me for the route
– Select a ro
ute type
– Select an M3
UA peer server (choose Remote Peer server, if associated with an OPC, select NONE, if
using DPC)
– Select an M3
UA user part (if associated with a DPC, select NONE for OPC)
– Select a poi
nt code
– Select a poi
nt code mask (Recommended value: Exact-match)
– Select a s
ub-service field type
–Click Cre
ate
Figure 307. Creating the New M3UA Route
3. Verify that the "M3ua route was successfully created" message displays.
Figure 308. Successful M3UA Route Message