Filter
Top Products
Adding an Adapter 205
Smart Media Software Configuration Guide 7 • Configuring H.248
–Enter a name for the hardware device
–Enter the se
rial number of the new hardware device (filling in the Serial Number field will cause auto-
completion of the field to occur).
– Select the appropriate hardw
are device from the Adapter Type field.
– Select Ena
bled from the Target State field.
–Click Cre
ate
Figure 350. Creating the New Hardware Device
4. Verify that the "Adapter was successfully created" message displays, and that the newly added hardware
device appears in the Hardware List below.
Figure 351. Successful Device Message