Filter
Top Products
Configuring SIP Signaling 57
Smart Media Software Configuration Guide 3 • Configuring an ISDN-SIP Gateway
Understanding Parameters for SIP Stacks
Creating a SIP transport server
After you have created a SIP stack, you must create a new SIP transport server for your configuration.
Note
In order to employ SIP transport servers, the protocol that they will
use to transport the SIP signaling traffic must be defined.
1. Cl
ick SIP in the navigation panel:
Figure 67. Menu: SIP
2. Click Edit next to the SIP stack for which you wish to create a transport server:
Figure 68. Edit SIP Configuration List
3. Click Create New Transport Server under the Transport Servers list:
Figure 69. Transport Servers List
4. Create the new SIP transport server:
–Enter a na
me for the server
– Select an appropriate po
rt type
– Select a hardware ad
apter
– Select an appropriate IP interfa
ce
Table 8. Configuration Parameters for New SIP Stacks
Parameter Description
Enabled Indicates whether an object is currently implemented or not
Name Used by the Web Portal to indicate a specific object or string in the system
Virtual Adapter Defines the Smart Media hardware adapter for which a new object is being created