Filter
Top Products
Configuring an M3UA System on IP Signaling Points 171
Smart Media Software Configuration Guide 5 • Configuring SIGTRAN Applications
3. Verify that the "M3ua Userpart was successfully created" message displays.
Figure 282. Successful M3UA User Part Message
Understanding Parameters for M3UA User Parts
Creating an M3UA Peer Signaling Process (IPSP)
After you have created M3UA user part, you must create a new
M3UA peer signaling process (PSP). A PSP is
used to describe a remote IPSP that is accessible through the M3UA system.
To create an M3UA Peer Signalling Process (PSP) on IPSP:
1. Cl
ick Create New M3ua Peer Signaling Process in the M3UA network configuration window:
Figure 283. M3UA Network Configuration Window: Create M3UA PSP
2. Configure the new M3UA PSP:
–Enter a na
me for the PSP
– Select IP S
erver Process (IPSP) as the PSP type
–Enter a de
stination port (as configured in the destination element)
–Click Cre
ate
Figure 284. Creating the New M3UA PSP
Table 64. Configuration Parameters for New M3UA User Part
Parameter Description
Name Used by the Web Portal to indicate a specific object or string in the system
MTP3 Network (Only displays for Signaling Gateway)
Associates an MTP3 network with a higher level network in an SS7 system