Filter
Top Products
Configuring ISDN-PRI Signaling 52
Smart Media Software Configuration Guide 3 • Configuring an ISDN-SIP Gateway
Configuring ISDN-PRI Signaling
Integrated Systems Digital Network (ISDN) is a circuit-switched telephone system that integrated voice and
data on the same lines. The Smart Media system can be configured to provide an ISDN signaling stack on the
trunks of one or more units to meet system configuration requirements. In order to configure ISDN-PRI sig-
naling for your system, you must create a new ISDN stack.
To create a new ISDN stack:
1. Cl
ick ISDN in the navigation menu, under the Signaling header:
Figure 55. Signaling > ISDN
2. Click Create New ISDN Stack:
Figure 56. ISDN Stack List
3. Create the new stack:
Note
Patton offers several ISDN variants, four of which support Non-
Facility Associated Signaling (NFAS). By clicking on 'Create', you
confirm the line service and in the case of ISDN variants which sup-
port NFAS you are permitted to add additional line services.
– Verify that the box labeled En
abled is checked
–Enter a na
me for the new ISDN stack
– Select a va
riant to associate with the stack
– Determine whether the stack will operate on the use
r side, or the network side
– Select a p
rimary D-channel line service
–Click Cre
ate