Filter
Top Products
Operating Instructions Teledyne API – T101 Operation Manual
140
4.8.2.10. Disabling/Enabling Data Channels
Data channels can be temporarily disabled, which can reduce the read/write wear on the
disk-on-module . The ALL_01 channel of the T101, for example, is disabled by default.
To disable a data channel, follow the instruction shown in Section 4.11.2.2 then press:
Edit Data Channel Menu
From the DATA ACQ UISITION menu
SETUP X.X 0) CONC: ATIMER, 2, 4032, R
PREV NEXT INS DEL EDIT PRNT EXIT
Exits to the main
Data Acquisition
menu
SETUP X.X NAME:CONC
<SET SET> EDIT PRINT EXIT
SETUP X.X CHANNEL ENABLE:ON
<SET SET> EDIT PRINT EXIT
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
SETUP X.X CHANNEL ENABLE:ON
OFF ENTR EXIT
Toggle to turn
channel ON or OFF
Press SET> until…
07266B DCN6485