Filter
Top Products
Introduction Teledyne API – T101 Operation Manual
22
Option
Option
Number
Description/Notes
RS-232 Multidrop
Enables communications between host computer and up to eight
analyzers.
62
Multidrop card seated on the analyzer’s CPU card.
Each instrument in the multidrop network requires this card and a
communications cable (Option 60B).
Special Features Built in features, software activated
N/A
Maintenance Mode Switch, located inside the instrument, places the
analyzer in maintenance mode where it can continue sampling, yet ignore
calibration, diagnostic, and reset instrument commands. This feature is of
particular use for instruments connected to Multidrop or Hessen protocol
networks.
Call Technical Support for activation.
N/A
Second Language Switch activates an alternate set of display messages in
a language other than the instrument’s default language.
Call Technical Support for a specially programmed Disk on Module containing the
second language.
N/A
Dilution Ratio Option allows the user to compensate for diluted sample gas,
such as in continuous emission monitoring (CEM) where the quality of gas in a
smoke stack is being tested and the sampling method used to remove the gas
from the stack dilutes the gas.
Call Technical Support for activation.
07266B DCN6485