Filter
Top Products
Operating Instructions Teledyne API – T101 Operation Manual
142
4.8.3. REMOTE DAS CONFIGURATION
Editing channels, parameters and triggering events as described in this section is can be
performed via the APICOM remote control program using the graphic interface shown in
Figure 4-15. Refer to the next Section 4.12 for details on remote access to the T101
analyzer.
Figure 4-12. APICOM User Interface for Configuring the DAS
Once an DAS configuration is edited (which can be done offline and without interrupting
DAS data collection), it is conveniently uploaded to the instrument and can be stored on a
computer for later review, alteration or documentation and archival. Refer to the
APICOM manual for details on these procedures. The APICOM user manual is included
in the APICOM installation file, which can be downloaded at http://www.teledyne-
api.com/software/apicom/.
CAUTION – Avoid losing data and saved configurations.
All data, parameters and channels will be replaced when uploading a DAS configuration
script to the analyzer through its communication ports. Back up data and the original
DAS configuration before attempting any DAS changes.
07266B DCN6485