Filter
Top Products
Model T101 Instruction Manual Troubleshooting & Service
241
QUESTION ANSWER
How often do I need to
change the particulate
filter?
Once per week. Table 8-1 contains a maintenance schedule listing
the most
important, regular maintenance tasks.
What is the averaging time
for a T101?
The default averaging time, optimized for ambient pollution
monitoring, is 240 seconds for stable concentrations and 20
seconds for rapidly changing concentrations; Refer to 10.7.1 for
more i
n
formation.
My analyzer has the
optional, user -configurable
analog output channels.
How do I program and use
them?
Instructions for this can be found in the Manual Addendum for
Configurable Analog Output, PN 06270.
How long does the sample
pump last?
The sample pump should last about one year and the pump
diaphragms should to be replaced annually or when necessary.
Use the PRES test function displayed via the front panel to see if
the diaphragm needs replacement (refer to Section 9.1.2).
Do I need a strip chart
recorder or external data
logger?
No, the T101 is equipped with a very powerful internal data
acquisition system (DAS). Section 4.8 describes the setup and
operat
ion
in detail.
14.
9.8. TECHNICAL ASSISTANCE
If this manual and its trouble-shooting / repair sections do not solve your problems,
technical assistance may be obtained from Teledyne API, Technical Support, 9480
Carroll Park Drive, San Diego, CA 92121. Phone: +1 858 657 9800 or 1-800 324 5190.
Fax: +1 858 657 9816. Email: sda_techsupport@teledyne.com.
Before you contact Technical Support, fill out the problem report form in Appendix C,
which is also available online for electronic submission at http://www.teledyne-
api.com/forms/index.asp.
07266B DCN6485