Filter
Top Products
Teledyne API – T101 Operation Manual Getting Started
35
Table 3-4. Analog Output Pin Assignmentss
PIN ANALOG OUTPUT VOLTAGE OUTPUT CURRENT LOOP OPTION
1 V Out I Out +
2
A1
Ground I Out -
3 V Out I Out +
4
A2
Ground I Out -
5 Not Available I Out +
6
A3
Not Available I Out -
7 V Out Not Available
8
A4
Ground Not Available
The default analog output voltage setting of the T101 UV Fluorescence H
2
S Analyzer is 0
– 5 VDC with a range of 0 – 500 ppb. To change these settings, see Sections 4.6.3 and
4.4.4 respectively.
An optional Current Loop
output is available for each output.
3.3.2.1. Current Loop Analog Outputs (Option 41) Setup
Figure 3-8. Current Loop Option Installed on the Motherboard
07266B DCN6485