Filter
Top Products
Teledyne API – T101 Operation Manual Operating Instructions
65
NOTE
If the analyzer beeps when you press the EXIT button, it means that you’ve made a
change/entered a new value for a parameter but have not caused it to be accepted by
pressing ENTR first.
4.4.1. SETUP – CFG: VIEWING THE ANALYZER’S
CONFIGURATION INFORMATION
Pressing the CFG button displays the instrument configuration information. This display
lists the analyzer model, serial number, firmware revision, software library revision, CPU
type and other information. Use this information to identify the software and hardware
when contacting Technical Support. Special instrument or software features or installed
options may also be listed here.
SAMPLE* RANGE = 500.0 PPB H2S =X.XXX
< TST TST > CAL SETUP
SAMPLE ENTER SETUP PASS : 818
8 1 8 ENTR EXIT
SAMPLE PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE EXIT
SAMPLE T101 SO2-H2S ANALYZER
NEXT PREV EXIT
Press EXIT
at
any time to
return to
SETUP menu
Press EXIT
at
any time to
return to the
SAMPLE dis
p
la
y
Press NEXT of PREV to move back
and forth through the following list
of Configuration information:
MODEL NAME
SERIAL NUMBER
SOFTWARE REVISION
LIBRARY REVISION
iCHIP SOFTWARE REVISION
1
HESSEN PROTOCOL REVISION
1
ACTIVE SPECIAL SOFTWARE
OPTIONS
1
CPU TYPE
DATE FACTORY CONFIGURATION
SAVED
1
Only appears if relevant option of Feature is active.
07266B DCN6485