Filter
Top Products
4/00 UDC 3300 Process Controller Product Manual 145
Lower Display
Prompt
Upper Display
Range of Setting
or Selection
Parameter
Definition
TIME1 (continued)
GSOAK
SOOTNG
DIGIN1
DIGIN2
MAN2
GUARANTEED SOAK— Cumulative time the process
was outside the guaranteed soak band.
SOOTING— Cumulative time process was in sooting state
DIGITAL INPUT1— Cumulative time Digital Input 1 was
closed
DIGITAL INPUT 2— Cumulative time Digital Input 2 was
closed
LOOP 2 MANUAL— Cumulative time Loop 2 was in
Manual.
HRS.MIN1
OR
DAYS.HRS1
00.00 to 23.59
1.00 to 416.15
Shows elapsed time of Timer 1 in Hours and Minutes. At
24.00, units change automatically to Days and Hours.
TIME 2
Same as TIME 1 The timer tracks the elapsed time of the selected event.
HRS.MIN2
OR
DAYS.HRS2
00.00 to 23.59
1.00 to 416.15
Shows elapsed time of Timer 2 in Hours and Minutes. At
24.00, units change automatically to Days and Hours.
TIME 3
Same as TIME 1 The timer tracks the elapsed time of the selected event.
HRS.MIN3
OR
DAYS.HRS3
00.00 to 23.59
1.00 to 416.15
Shows elapsed time of Timer 3 in Hours and Minutes. At
24.00, units change automatically to Days and Hours.
COUNTER1
COUNTER 1
DISABL
MANUAL
AL1SP1
AL1SP2
AL2SP1
AL2SP2
DIGIN1
DIGIN2
OUT1*1K
OUT2*1K
GSOAK
PWRCYC
PV_RNG
FAILSF
TUNE
MAN2
PVRNG2
FSF2
COUNTER 1—The counter counts the number of times
the selected event has occurred.
DISABLE—Counter is not in use.
LOOP 1 MANUAL—Number of times Loop 1 has been in
Manual mode.
ALARM 1 SETPOINT 1—Number of times Alarm 1
Setpoint 1 has been activated.
ALARM 1 SETPOINT 2—Number of times Alarm 1
Setpoint 2 has been activated.
ALARM 2 SETPOINT 1—Number of times Alarm 2
Setpoint 1 has been activated.
ALARM 2 SETPOINT 2—Number of times Alarm 2
Setpoint 2 has been activated.
DIGITAL INPUT 1—Number of times Digital Input 1 has
closed.
DIGITAL INPUT 2—Number of times Digital Input 2 has
closed.
OUTPUT 1 RELAY x 1000—Thousands of times Output 1
relay has been activated.
OUTPUT 2 RELAY x 1000—Thousands of times Output 2
relay has been activated.
GUARANTEED SOAK—Number of times unit has been in
guaranteed soak.
POWER CYCLE—Number of times unit’s power has
cycled off and on.
LOOP 1 PV RANGE—Number of times Loop 1’s PV has
been out of range.
LOOP 1 FAILSAFE—Number of times Loop 1 has been in
Failsafe mode.
LOOP 1 TUNE—Number of times Loop 1 has been tuned
(manually and automatically)
LOOP 2 MANUAL—Number of times Loop 2 has been in
Manual mode.
LOOP 2 PV RANGE—Number of times Loop 2’s PV has
been out of range.
LOOP 2 FAILSAFE—Number of times Loop 2 has been in