Filter
Top Products
170 UDC 3300 Controller Product Manual 4/00
Switch between two
sets via the keyboard
(without automatic
switchover)
This procedure is operational only if 2 PID SETS was configured at the
Control Set Up group. The procedure in Table 5-19 shows you how to
switch from one set to another.
Table 5-19 Procedure for Switching PID SETS from the Keyboard
Step Operation Press Action
1
Access the PID
set display
LOWER
DISPLAY
until you see:
Lower Display
Upper Display
PIDSETX
The PV value
X = 1 or 2
or
to change PID SET 1 to PID SET 2 or vice
versa.
You can use Accutune on each set.