Honeywell UDC 3300 Universal Remote User Manual


 
4/00 UDC 3300 Controller Product Manual 7
Section 2 – Installation
2.1 Overview
Introduction
Installation of the UDC 3300 Controller consists of mounting and wiring
the controller according to the instructions given in this section.
Read the pre-installation information, check the model number
interpretation and become familiar with your model selections, then
proceed with installation.
Whats in this section?
This section contains the following information:
Topic See Page
2.1 Overview
Specifications
7
8
2.2 Model Number Interpretation 12
2.3 Mounting 13
2.4 Wiring 15
2.5 Wiring Diagrams
Composite Wiring Diagram
Line Voltage
Input #1/Input #2
Two HLAI
Time Proportional Output
Electromechanical
Solid State
10-amp Solid State
Open Collector
Current Output/Universal Output
Two Current or Two Relay
One Current (Auxiliary) and Three Relay
Position Proportional Output
Auxiliary Output
Digital Inputs
Communications
RS422/485/Modbus
DMCS
Transmitter Power for 4-20 mA 2-wire Transmitter
Using Open Collector Alarm 2 Output
Using Auxiliary Output
18
18
19
20
21
22
22
23
24
25
26
26
27
28
29
29
30
30
31
32
32
33
2.6 Control and Alarm Relay Contact Information 34