Honeywell UDC 3300 Universal Remote User Manual


 
262 UDC 3300 Controller Product Manual 4/00
How to remove the
chassis
Refer to Figure 9-1 for steps and follow the procedure listed in Table
9-16.
Table 9-16 How to Remove the Chassis
Step Action
1
Loosen the screw on the front face.
2
Insert a flat-bladed screwdriver into the hole on the top of the case as shown
in Figure 9-1 and pry chassis forward slightly until the chassis connectors
separate from the back of the case.
3
Grasp the bezel and pull the chassis out of the case.
Figure 9-1 Chassis Removal
Loosen screw
Insert screwdriver
and pry forward
Grasp bezel
and pull
chassis out
2
3
1
22637