Filter
Top Products
6-52 Programming MN792
TEC Option
The Technology Option function block sets the inputs and outputs of the communications board options if
installed. If a communications board is installed, refer to its manual for additional information.
1 SERIAL LINKS
2 TEC OPTION
TEC Option Type
TEC Option IN1
TEC Option IN2
TEC Option IN3
TEC Option IN4
TEC Option IN5
TEC Option Fault
TEC Option VER
TEC Option OUT1
TEC Option OUT2
TEC Option
Version [507]
[500] Type
[501] Input 1
None
0
[504] Input 4
[505] Input 50
[503] Input 3
0
0
[502] Input 2
Fault [506]
0
None
0x0000
Output 2 [509]
Output 1 [508]
0
0
Parameter Descriptions
FAULT (TEC Option Fault)
The fault state of the Technology Option
0 : None – no faults
1 : Parameter – parameter out–of–range
2 : Type Mismatch – TYPE parameter mismatch
3 : Self Test – hardware fault – internal
4 : Hardware – hardware fault – external
5 : Missing – no option fitted
6 : Version Number – older than Version 2.x (TEC option is using software
that doesn’t fully support the drive.
Range: 0 to 6
VERSION (TEC Option)
The software version of the TEC Option. No option installed = zero.
Range: 0x0000 to 0xFFFF
OUTPUT 1 and 2 (TEC Option Out 1 to TEC Option Out 2)
The use of these output parameters depends upon the type of Technology Option installed. Refer to
its manual for additional information.
Range: xxxxx
TYPE (TEC Option Type)
sets the type of Technology Option.
0 : None
1 : RS485
2 : Profibus DP
3 : Link
4 : Device Net
5 : Can Open
6 : Lonworks
7 : Type 7
Range: 0 to 7
Input 1 To Input 5 (TEC Option In 1 to TEC Option In 5)
The use of these input parameters depends upon the type of Technology Option installed. Refer to
its manual for additional information.
Range: –32768 to 32767