Filter
Top Products
General Information 2-3MN792
PRECAUTIONS:
WARNING: Do not touch any circuit board, power device or electrical connection before you
first ensure that power has been disconnected and there is no high voltage
present from this equipment or other equipment to which it is connected.
Electrical shock can cause serious or fatal injury.
WARNING: Be sure that you are completely familiar with the safe operation of this equipment.
This equipment may be connected to other machines that have rotating parts or
parts that are controlled by this equipment. Improper use can cause serious or
fatal injury.
WARNING: Be sure all wiring complies with the National Electrical Code and all regional and
local codes or CE Compliance. Improper wiring may cause a hazardous
condition.
WARNING: Be sure the system is properly grounded before applying power. Do not apply AC
power before you ensure that grounds are connected. Electrical shock can cause
serious or fatal injury.
WARNING: Do not remove cover for at least five (5) minutes after AC power is disconnected
to allow capacitors to discharge. Electrical shock can cause serious or fatal
injury.
WARNING: Improper operation may cause violent motion of the motor and driven equipment.
Be certain that unexpected movement will not cause injury to personnel or
damage to equipment.
WARNING: Motor circuit may have high voltage present whenever AC power is applied, even
when motor is not moving. Electrical shock can cause serious or fatal injury.
WARNING: If a motor is driven mechanically, it may generate hazardous voltages that are
conducted to its power input terminals. The enclosure must be grounded to
prevent a possible shock hazard.
WARNING: The user must provide an external hard-wired emergency stop circuit to disable
the control in the event of an emergency.
Continued on next page.