Filter
Top Products
Keypad Operation 7-3MN792
Local Menu
L
R
key (Figure 7-2)
Pressing the L/R key from anywhere in the Menu System activates the Local menu. The Local menu provides
setpoint information for local operation. Pressing and holding the M key in the Local menu will display additional
Feedback information. A display of forward or reverse feedback or reference whichever was previously
selected by the FWD/REV key. Pressing the “M” key changes between feedback and reference.
Figure 7-2 Local Menu
HOLD
Menu System
FORWARD
REF: 0.00%
FORWARD
FBK. 0.00%
operates from Local mode only
PROG
M
L/R
HOLD
REVERSE
FBK: 0.00%
REVERSE
REF: 0.00%
M
Local
Remote
Control Control
Local Menu
FWD/REV key
menu/parameter
Mode Mode
L/R Key The L/R key (Local/Remote) only operates when the motor is stopped. It changes between Local and Remote
modes. A Local menu is displayed in the Local mode, and a main programming menu is displayed in the
Remote mode.
In Local, the Local LEDs, SEQ and REF, are illuminated and the RUN, STOP, JOG, A, ", Y and B keys are
used to control the motor direction and speed. Pressing the L/R key in Local mode selects Remote mode and
returns to the previous menu.
PROG Key The PROG key only operates in Local mode. It changes between the Local menu and the main Menu System
but the control remains in Local mode. This allows you to change parameters normally available in Remote
mode but remain in Local mode operation.