Filter
Top Products
4-4 Receiving & Installation MN792
Optional Remote Keypad Installation (Enclosure rating of IP54 when correctly mounted). The keypad may be
remotely mounted using optional Baldor keypad extension cable.
Tools Required:
• Center punch, file and screwdrivers (Phillips and straight) and crescent wrench.
• #19 drill and drill motor .
Figure 4-4 Remote Keypad Installation
2
5
1
4
3
CBLD030KP
Keypad ACBD01A01
Bezel ACBD02A01
Mounting Instruction:
1. Locate a flat mounting surface. Place the template on the mounting surface (step 1).
2. Accurately center punch the mounting holes.
3. Drill holes for the two mounting screws.
4. Use the drill to remove metal for the 27 x 29 mm rectangular hole (step 2).
5. Debur the rectangular hole making sure the panel stays clean and flat.
6. Remove the protective film from the keypad gasket (step 3).
7. Assemble the keypad to the panel. Use two screws provided (step 4).
8. Connect the 10 ft. cable at the keypad and P3 of the control (step 5).
Figure 4-5 Template
1.14
(29)
1.06 (27)
1.97
(50)
1.90 (48.25)
3.78 (96.5)
3.40
(86.5)
5.22
(132.5)
4.09 (104)
1.57
(40)
0.16 (4.0) Dia.
4 Places
Bottom