Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
2-61
• DST MCS 4000 MCUs connect as endpoints to the RMXs or MGCs on
higher levels.
Figure 2-5 MIH Cascade Levels
MIH Cascading Guidelines
Master and Slave Conferences
•In MIH Cascading conferences, although there are multiple levels of
Master and Slave relationships between conferences, the conference
that runs on the MCU on level 1 of the hierarchy must be the Master
for the entire cascading session. When an MGC is part of the
cascading topology, it must be set as Level 1 MCU.
• Conferences running on MCUs on levels 2 and 3 and can be both
Masters and Slaves to conferences running on MCUs on levels above
and below them.
• All conferences running on MCUs on level 4 are Slave conferences.
• When the DST MCS 4000 is on level 3 and acting as slave to level 2,
the RMX 2000 on level 2 must dial out to it in order for the DST MCS
4000 to be identified as slave. The link between the two MCU (dial
out participant) is defined as a standard participant and not as a
cascading link.
Level 1
Level 2
Level 3
Level 4
RMX 2000
MGC
MGC
MCU
DST MCS 4000
For more information about this
configuration, see the relevant MGC
documentation.
or
or
RMX 2000