Filter
Top Products
B-1
Appendix B
Alarms and Faults
Alarms
Table B-1 Alarms
Alarm Code Alarm Description
A new activation key was loaded. Reset
the system.
A new activation key was loaded:
Reset the MCU.
A new version was installed. Reset the
system.
A new version was installed:
Reset the MCU.
A private version is loaded A private version is loaded: [private description].
Action redirection failure Possible explanations:
• Action redirection failure.
• Action redirection map incomplete.
Automatic reset is unavailable in Safe
Mode
The system switches to safe mode if many resets occur
during startup. To prevent additional resets, and allow
the system to complete the startup process the
automatic system resets are blocked.
Card failure Possible reasons for the card failure:
• Resetting Card
• Resetting component
• Unknown shelf error
• Unknown card error
Card not found This occurs when: the system does not receive an
indication about the card (since it does not exist…)
usually when the card was removed from the MCU and
the system did not have a chance to recalculate it
resources.