Filter
Top Products
Chapter 2-Additional Conferencing Information
2-78
3 If the MGC is dialing the RMX and the cascaded link connects to the
conference via the Cascade-enabled Entry Queue without being
prompted for the conference password, set the flag to YES as follows:
— ENABLE_CASCADED_LINK_TO_JOIN_WITHOUT_PASSWO
RD=YES
4 Click OK.
5 Reset the MCU to apply the changes.
Defining the Cascade Enabled Entry Queue on the RMX 2000
If the dialing is done from the conference running on the MGC that is the
Master MCU, a Cascade-enabled Entry Queue must be defined on the
RMX 2000 setting it as Slave.
For more details, see the RMX 2000 to RMX 2000 Cascading.