Filter
Top Products
Chapter 16-RMX Administration and Utilities
16-88
ActiveX Bypass
At sites that, for security reasons, do not permit Microsoft® ActiveX®
to be installed, the MSI (Windows Installer File) utility can be used to
install .NET Framework and .NET Security Settings components on
workstations throughout the network.
All workstation that connect to RMX systems must have both .NET
Framework and .NET Security Settings running locally. These
components are used for communication with the RMX and can only
be installed on workstations by users with administrator privileges.
The MSI utility requires the IP addresses of all the RMX systems
(both control unit and Shelf Management IP addresses) that each
workstation is to connect to.
If the IP address of the any of the target RMXs is changed, the
ActiveX components must be reinstalled.
Installing ActiveX
To install ActiveX components on all workstations in the network:
1 Download the MSI file EMA.ClassLoaderInstaller.msi from the
Polycom Resource Center.
The MSI file contains installation scripts for both .NET Framework
and .NET Security Settings.
2 Create a text file to be used during the installation containing the IP
addresses of all the RMX systems (both control unit and Shelf
Management IP addresses) that each workstation in the network is to
connect to.
The file must be named url_list.txt and must be saved in the same
folder as the downloaded MSI file.