Filter
Top Products
Chapter 16-RMX Administration and Utilities
16-24
H323_FREE_VIDEO
_RESOURCES
For use in the Avaya Environment.
In the Avaya Environment there are features
that involve converting undefined dial-in
participants’ connections from video to audio
(or vice versa). To ensure that the participants’
video resources remain available for them,
and are not released for use by Audio Only
calls, set this flag to NO.
If set to YES, the RMX will release video
resources for Audio Only calls.
Default: YES.
SIP_FREE_VIDEO
_RESOURCES
For use in Avaya and Microsoft Environments.
When set to NO (required for Avaya and
Microsoft environments), video resources that
were allocated to participants remain allocated
to the participants as long as they are
connected to the conference even if the call
was changed to audio only. The system
allocates the resources according to the
participant’s endpoint capabilities, with a
minimum of 1 CIF video resource.
Enter YES to enable the system to free the
video resources for allocation to other
conference participants. The call becomes an
audio only call and video resources are not
guaranteed to participants if they want to add
video again.
Default value in Microsoft environment: NO.
CP_REGARD_TO
_INCOMING_SETUP
_RATE
For use in the Avaya Environment.
If set to YES, the RMX calculates the line rate
for incoming calls in CP conferences,
according to the line rate which is declared by
the endpoint in the H.225 setup message.
If set to NO, the rate is calculated according to
the conference line rate regardless of the rate
in the H.225 setup message.
Default: YES.
Table 16-4 Manually Added System Flags – MCMS_PARAMETERS
(Continued)
Flag and Value Description