Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
12-7
6 Click the DNS tab.
7 In the DNS field, select Specify to define the DNS parameters.
8 View or modify the following fields:
Table 12-3 Management Network Properties – DNS Parameters
Field Description
MCU Host Name Enter the name of the MCU on the network.
Default name is RMX
DNS Select:
• Off – if DNS servers are not used in the network.
• Specify – to enter the IP addresses of the DNS
servers.
Note: The IP address fields are enabled only if
Specify is selected.
Register Host
Names
Automatically to
DNS Servers
Select this option to automatically register the MCU
Signaling Host and Shelf Management with the DNS
server.
Local Domain
Name
Enter the name of the domain where the MCU is
installed.