Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
15-15
The New Conference IVR Service - Video Services dialog box opens.
13 Define the following parameters:
14 Click the DTMF Codes tab.
The New Conference IVR Service - DTMF Codes dialog box opens.
15 If required, modify the DTMF codes or permissions. For more details,
see RMX 2000 Administrator’s Guide, "New Conference IVR Service
Properties - DTMF Codes” on page 13-24.
16 Click the Operator Assistance tab.
17 If Operator Assistance will not be available to participants, clear the
Enable Operator Assistance option, which is automatically selected
to disable it.
Table 15-2 New Conference IVR Service Properties - Video Services
Parameters
Video
Services
Description
Click&View Select this option to enable endpoints to run the
Click&View application that enables participants to
select a video layout from their endpoint.
Video
Welcome Slide
Select the video slide file to be displayed when
participants connect to the conference. To view any
slide, click the Preview Slide
( ) button.
If the video slide file was not uploaded to the MCU prior
to the IVR Service definition, click the Add Slide button.
The Install File dialog box opens. The uploading
process is similar to the uploading of audio files. For
more information, see step 6 on page 13-7 in the RMX
2000 Administrator’s Guide.
Notes:
• When using one of the default Polycom slides, the
slide will be displayed in the resolution defined in the
profile, i.e. CIF, SD, HD 720p or HD 1080p. When
using a custom slide, it will be displayed in the only
in CIF resolution.
• When defining a gateway IVR Service, the
recommended default slide is:
Default_GW_Welcome_Slide.