Polycom 2000 Home Theater Server User Manual


 
Polycom RMX 2000 Administrator’s Guide
15-5
[MCU Prefix in SIP Proxy] - The prefix with which the RMX is
registered to the SIP Proxy. This component is optional and is not
required in most cases.
[GW Profile ID] - The ID of the Gateway Profile to be used for routing
the call to the destination endpoint or DMA, as defined in the RMX
Gateway Profiles. It includes the parameters of the call to the destination.
* - to indicate H.323, SIP or ISDN connection protocol to the destination
endpoint (followed by the appropriate destination number). Placing this
delimiter before the destination number causes the system to try to
connect the endpoint using H.323 first, then SIP and lastly ISDN
according to the selected protocols.
** - to indicate a PSTN connection to the destination endpoint (followed
by the appropriate destination number).
[Destination number] - the destination number as alias, IPv4 address
or ISDN/PSTN number.
[@domain name] - the RMX domain name as registered to the SIP Proxy
The dialing string:
[GW Profile ID]*[Destination Number, first
participant]*[Destination Number, second
participant]**[destination number]......*[Destination
Number, tenth participant]@domain name
Optional:
[GW Profile ID]*[Destination Number, first
participant]*[Destination Number, second
participant]**[destination number]......*[Destination
Number, tenth participant]@IP address of the RMX
signaling host
Optional:
[MCU prefix in SIP Proxy][GW Profile ID]*[Destination
Number, first participant]*[Destination Number, second
participant]**[destination number]......*[Destination
Number, tenth participant]@domain name
For example, if the GW Profile ID is 2000, the domain name is
service.polycom.com, and the destination number is 3456, enter:
2000*3456@service.polycom.com.
If using the IP address of the RMX signaling host (for example,
172.22.188.22) instead of the domain name enter:
2000*3456@172.22.188.22.