Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
F-5
Creating/Modifying System Flags
The following System Flags in system.cfg control secure communications.
• RMX_MANAGEMENT_SECURITY_PROTOCOL
• EXTERNAL_DB_PORT
Appendix F, “System Flags” , below, lists both flags and their settings.
If the System Flag, RMX_MANAGEMENT_SECURITY_PROTOCOL does not
exist in the system, it must be created by using the RMX Setup menu.
For more information see the RMX 2000 Administrator’s Guide, "Modifying
System Flags” on page 16-10.
The RMX must be restarted for modified flag settings to take effect.
Enabling Secure Communication Mode
After the SSL/TLS Certificate is installed, secure communications are
enabled by modifying the properties of the Management Network in the
Management Network properties dialog box.
When Secure Communications Mode is enabled:
•Only https:// commands from the browser to the Control Unit IP
Address of the RMX are accepted.
• The RMX listens only on secured port 443.
• All connection attempts on port 80 are rejected.
Table F-2 System Flags
Flag Description
RMX_MANAGEMENT_
SECURITY_PROTOCOL
Enter the protocol to be used for secure
communications.
Default: TLSV1_SSLV3 (both).
Default for U.S. Federal licenses: TLSV1.
EXTERNAL_DB_PORT The external database server port used by the
RMX to send and receive XML requests/
responses.
For secure communications set the value to 443.
Default: 5005.