Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
A-3
H323 call closed. Remote
busy
The endpoint was busy. (Applicable only to dial-
out)
H323 call closed. Normal The call ended normally, for example, the
endpoint disconnected.
H323 call closed. Remote
reject
The endpoint rejected the call.
H323 call closed. Remote
unreachable
The gatekeeper could not find the endpoint's
address.
H323 call closed. Unknown
reason
The reason for the disconnection is unknown, for
example, the endpoint disconnected without
giving a reason.
H323 call closed. Faulty
destination address
Incorrect address format.
H323 call closed. Small
bandwidth
The gatekeeper allocated insufficient bandwidth
to the connection with the endpoint.
H323 call closed.
Gatekeeper reject ARQ
The gatekeeper rejected the endpoint's ARQ.
H323 call closed. No port
left
There are no ports left in the IP card.
H323 call closed.
Gatekeeper DRQ
The gatekeeper sent a DRQ.
H323 call closed. No
destination IP address
For internal use.
H323 call. Call failed prior
or during the capabilities
negotiation stage
The endpoint did not send its capabilities to the
gatekeeper.
H323 call closed. Audio
channels didn't open
before timeout
The endpoint did not open the audio channel.
H323 call closed. Remote
sent bad capability
There was a problem in the capabilities sent by
the endpoint.
Table A-1 Call Disconnection Causes (Continued)
Disconnection Cause Description