Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
7-15
8 Click the Video Settings tab.
The New Profile - Video Settings dialog box opens.
Video Clarity™ When enabled (default), Video Clarity applies video
enhancing algorithms to incoming video streams of
resolutions up to and including SD. Clearer images
with sharper edges and higher contrast are sent back
to all endpoints at the highest possible resolution
supported by each endpoint.
All layouts, including 1x1, are supported.
Video Clarity can only be enabled for Continuous
Presence conferences in MPM+ Card Configuration
Mode.
Content Video Definition
Content Settings Select the transmission mode for the Content channel:
• Graphics — basic mode, intended for normal
graphics
• Hi-res Graphics — a higher bit rate intended for
high resolution graphic display
• Live Video — Content channel displays live video
Selection of a higher bit rate for the Content results in
a lower bit rate for the people channel.
For more information, see RMX 2000 Administrator’s
Guide, "H.239” on page 2-12.
Content Protocol H.263 – Content is shared using H.263 even if some
endpoints have H.264 capability.
Up to H.264 – H.264 is the default Content sharing
algorithm.
When selected:
• Content is shared using H.264 if all endpoints have
H.264 capability.
• Content is shared using H.263 if all endpoints do
not have H.264 capability.
• Endpoints that do not have at least H.263 capability
can connect to the conference but cannot share
Content.
Table 7-3 New Profile - Video Quality Parameters (Continued)
Field/Option Description