Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
12-21
13 View or modify the following fields:
Table 12-9 Default IP Service – Conferencing – SIP Servers Parameters
Field Description
SIP Server Select:
• Specify – to manually configure SIP servers.
• Off – if SIP servers are not present in the
network.
Register: Ongoing
Conferences/
Meeting Rooms/
Gateway Profiles/
Entry Queues &
SIP Factories
Select the conferencing elements to register with the
SIP server.
Registering all the conferences and Meeting Rooms
with the SIP proxy loads the proxy as the
registration is constantly refreshed. It is therefore
recommended to register only the Entry Queues
and SIP Factories, and use the Entry Queue for
conference access.
Refresh
Registration every
__ seconds
Enter the frequency in which the system informs the
SIP proxy that it is active by re-sending the details of
all registered conferencing elements to the server.
If the registration is not renewed within the defined
time interval, the SIP server will not refer calls to the
conferencing entity until it reregisters. If timeout is
set to 0, re-registration is disabled.
The default value is 3600 seconds (60 minutes).